Home
News
Photo Gallery

Careers

Careers

job Postings

Below is a list of all current job postings.
Apply now to : jobs@gulfspic.com indicating the Job Code and Title along with below details:
  • - Detailed CV
  • - Degree & experience certificates
  • - Passport copy
  • - Current employment proof
  • - Contact mobile no & mail id
  • - Kuwait Civil ID copy
  • - Current work permit copy
#
ENGINEER MAINTENANCE PLANNING

BACHELORS DEGREE IN MECHANICAL / CIVIL / ELECTRICAL/ INSTRUMENTATION ENGINEERING OR EQUIVALENT FROM A RECOGNIZED UNIVERSITY

SHOULD BE ABLE TO REVIEW, UPDATE AND MONITOR PROJECT SCHEDULES AND WORKS PROGRESS STATUS INCLUDING IDENTIFYING SLIPPAGE /AREAS OF CONCERN. REVIEWING OF CONTRACTOR/CONSULTANTS PLANNING DELIVERABLES E.G. SCHEDULE & PROGRESS REPORTS RECEIVED TIME TO TIME. DATA COLLECTION, ANALYSIS AND COMPILATION OF VARIOUS PROJECTS REPORTS AS DIRECTED BY MANAGEMENT FROM TIME TO TIME.

#
ENGINEER ROTATING EQUIPMENT

BACHELORS DEGREE IN MECHANICAL ENGINEERING FROM A RECOGNIZED UNIVERSITY

SHOULD HAVE INDUSTRIAL PAINTING EXPERIENCE. MUST KNOW HOW TO SELECT APPROPRIATE PAINT OR MIX PAINTS. SHOULD BE ABLE TO OPERATE BRUSH / SPRAY PAINTING TO APPLY PROTECTIVE COATINGS AND PAINTS TO THE FABRICATED STRUCTURAL STEEL MATERIAL OR PIPES / SPOOLS WITH THE ABILITY TO PREPARE FABRICATED STEEL ITEMS / SPOOLS FOR APPLICATION OF PAINT AND OTHER PROTECTIVE COATINGS. SHOULD BE ABLE TO OPERATE COMPRESSORS, BLASTING EQUIPMENTS, AIRLESS, CONVENTIONAL SPRAY GUNS AND BE ABLE TO MAKE SURFACE PREPARATION , BEFORE PAINTING.

#
ENGINEER MACHINE SHOP

BACHELORS DEGREE IN MECHANICAL ENGINEERING FROM A RECOGNIZED UNIVERSITY

SHOULD HAVE EXPERIENCE IN ALL TYPES OF MECHANICAL REPAIR WORKS IN OIL REFINERY OR PETROCHEMICAL COMPLEX USING INDUSTRY STANDARDS, CODES AND PRACTICES.

#
SUPERVISOR CONDITION MONITORING

DIPLOMA IN MECHANICAL ENGINEERING OR EQUIVALENT

SHOULD HAVE EXPERIENCE AS PLANT SUPERVISOR IN THE MAINTENANCE FIELD OF ROTATING EQUIPMENT. CARRY OUT VIBRATION MONITORING & DATA COLLECTION ON ROTATING EQUIPMENT. EXPERIENCE IN USE OF VIBRATION MONITORING SYSTEMS USING DIAGNOSTIC SOFTWARES PRISM 2, IQ-2000, ADRE-3 FOR WINDOWS ETC., WITH PROFICENCY TO USE IRD/SKF MICROLOG / BENTLYNEVADA DATA COLLECTORS.

#
SUPERVISOR VALVE SHOP

HNC / DIPLOMA IN MECHANICAL ENGINEERING

SHOULD HAVE EXPERIENCE AS SUPERVISOR IN PETROLEUM / PETROCHEMICAL PROCESS PLANTS IN THE FIELD OF MAINTENANCE OF VALVES. CONVERSANT WITH ONLINE CALIBRATION TECHNIQUES FOR SAFETY VALVES AND API STANDARDS FOR TESTING OF VALVES.

#
SUPERVISOR RIGGING

INDUSTRIAL DIPLOMA OR HIGHER SECONDARY EDUCATION FOLLOWED BY TWO YEARS OF FORMAL TRAINING IN ENGINEERING SCHOOL

SHOULD HAVE EXPERIENCE IN RIGGING OF LARGE EQUIPMENT IN REFINERY OR PETROCHEMICAL OR HEAVY INDUSTRIES WITH AT LEAST 3 YEARS EXPERIENCE IN CONSTRUCTION SITE EQUIPMENT RIGGING IN SUPERVISORY POSITION.

#
FOREMAN MATERIALS

HIGHER SECONDARY SCHOOL EDUCATION WITH 3 OR 2 YEARS TECHNICAL DIPLOMA.

SHOULD HAVE EXPERIENCE IN MATERIALS HANDLING / STOREKEEPING ACTIVITIES IN OIL INDUSTRY / PETROCHEMICAL COMPLEX USING CMMS SYSTEM.

#
EXECUTIVE SECRETARY

GRADUATE IN ANY DISCIPLINE

SHOULD HAVE EXPERIENCE IN TECHNICAL CLERICAL WORK, OF WHICH 6 YEARS SHOULD BE AS SECRETARY. COVERSANT WITH REFINERY MECHANICAL EQUIPMENT TERMINOLOGIES, DIIMS, OUTLOOK FEATURES AND OTHER OFFICE TOOLS.

#
CIVIL ENGINEER

FULL TIME GRADUATE DEGREE IN CIVIL ENGINEERING

SHOULD HAVE MINIMUM 8 YEARS OF EXPERIENCE IN CIVIL CONSTRUCTION AND MAINTENANCE WORKS IN OIL & GAS, PETROCHEMICAL AND REFINERY PROJECTS. PREVIOUS CLIENT APPROVAL MANDATORY FOR KNPC, KOC, KIPIC. KSE MEMBERSHIP CARD IS REQUIRED.

#
SR. SCHEDULER

UNIVERSITY DEGREE DIPLOMA ENGINEERING + 2 YEAR DIPLOMA CERTIFICATE COURSE IN COMPUTER APPLICATIONS

SHOULD BE ABLE TO PARTICIPATE IN PREPARING DAILY PLANNING SHEET OF THE ASSIGNED AREA. ASSIST IN PREPARATION WORK PLAN FOR SHUTDOWN & PREVENTIVE MAINTENANCE ETC. PROGRAMMING WORK USING CMMS SYSTEM, PRIMAVERA (P6) PACKAGE & MAXIMO ETC. ASSIST IN COLLECTION OF DAILY SHUTDOWN PROGRESS DATA INCLUDING MANPOWER/MATERIAL CONSUMPTION AND PROGRESS, ENTER DATA IN THE RELATED COMPUTER PACKAGE AND PREPARE VARIOUS REPORTS.

#
CIVIL SUPERVISOR

FULL TIME 3 YEARS DIPLOMA IN CIVIL ENGINEERING

SHOULD HAVE MINIMUM 8 YEARS OF EXPERIENCE IN CIVIL CONSTRUCTION AND MAINTENANCE WORKS IN OIL & GAS, PETROCHEMICAL AND REFINERY PROJECTS. PREVIOUS CLIENT APPROVAL MANDATORY FOR KNPC, KOC, KIPIC.

#
ROTATING EQUIPMENT TECHNICIAN

TWELVE YEARS OF SCHOOLING FOLLOWED BY FORMAL APPRENTICESHIP TRAINING IN MACHINERY WORK (ITI / NCVT).

SHOULD HAVE HANDS ON EXPERIENCE IN OVERHAULING AND MAINTENANCE OF ROTATING EQUIPMENT IN OIL / PETROCHEMICAL PROCESS PLANTS.

#
MACHINIST

INTERMEDIATE EDUCATION OR I.T.I IN MACHINERY WORK

SHOULD HAVE EXPERIENCE IN MACHINIG SUCH AS OPERATING ALL TYPES OF PRECISION METAL CUTTING MACHINES AND PERFORM ALL THE WORKS RELATED TO SUCH MACHINES.

#
BENCH FITTER

EDUCATION TO C & G LEVEL OR COMPLETION OF INTERMEDIATE EDUCATION FOLLOWED BY FORMAL APPRENTICESHIP TRAINING IN MACHINERY WORK

SHOULD HAVE EXPERIENCE IN GAS PLANTS, REFINERIES AND / OR PETROCHEMICAL PLANTS IN THE MAINTENANCE, REPAIR AND OVERHAUL OF ALL TYPES OF PR�CISING PLANTS EQUIPMENT, ROTATING AND STATIONARY AND BE ABLE TO PERFORM GENERAL MAINTENANCE FITTING DUTIES USING HAND AND MACHINE TOOLS.

#
BALANCE MACHINE OPERATOR

INTERMEDIATE EDUCATION OR I.T.I IN MACHINERY WORK

SHOULD HAVE EXPERIENCE IN BALANCING & MACHINING. ABILITY TO OPERATE BALANCING MACHINES FOR ROTOR, SHAFT ETC. AND PRECISION METAL CUTTING MACHINES.

#
INSTRUMENTATION ENGINEER

BACHELORS DEGREE IN INSTRUMENTATION / ELECTRONICS ENGINEERING

SHOULD BE SKILLED IN PNEUMATIC, HYDRAULIC, ELECTRONIC INSTRUMENTATION, CONTROL SYSTEMS & ROTATING EQUIPMENT INSTRUMENTATION.

#
SENIOR INSTRUMENTATION TECHNICIAN

DIPLOMA ENGINEERING IN INSTRUMENTATION / ELECTRONICS

SHOULD BE SKILLED IN PNEUMATIC, HYDRAULIC, ELECTRONIC INSTRUMENTATION, CONTROL SYSTEMS & ROTATING EQUIPMENT INSTRUMENTATION.

#
INSTRUMENTATION TECHNICIAN

DIPLOMA ENGINEERING IN INSTRUMENTATION / ELECTRONICS

SHOULD BE SKILLED IN PNEUMATIC, HYDRAULIC, ELECTRONIC INSTRUMENTATION, CONTROL SYSTEMS & ROTATING EQUIPMENT INSTRUMENTATION.

#
INSTRUMENTATION TECHNICIAN (ROTATING EQUIPMENT)

DIPLOMA ENGINEERING IN INSTRUMENTATION / ELECTRONICS

SHOULD BE SKILLED IN INST. & CONTROL SYSTEMS INCLUDING MICROPROCESSOR BASED SYSTEM, ENGINE MANAGEMENT SYSTEM, ROTATING EQUIPMENT, GAS TURBINES, VARIABLE SPEED MOTORS & GAS COMPRESSORS.

#
INSTRUMENTATION FITTER

DIPLOMA ENGINEERING IN ELECTRICAL / INSTRUMENTATION OR EQUIVALENT

SHOULD BE SKILLED IN INSTRUMENT FITTING FOR INSTALLATION, REMOVAL, REPAIR & MAINTENANCE OF ALL INSTRUMENTS.

#
SENIOR ELECTRICAL TECHNICIAN

DIPLOMA ENGINEERING IN ELECTRICAL

SHOULD HAVE EXPERIENCE IN MAINTENANCE & REPAIR OF ALL ELECTRICAL EQUIPMENT; OPERATE HT / LT NETWORK, TROUBLESHOOTING OF MOTORS, CIRCUIT BREAKERS, STARTERS, TRANSFORMERS, VSDS, UPS, MICROPROCESSOR BOARDS.

#
ELECTRICAL TECHNICIAN

DIPLOMA ENGINEERING IN ELECTRICAL

SHOULD BE SKILLED IN MAINTENANCE & REPAIR OF ALL ELECTRICAL EQUIPMENT; OPERATE HT / LT NETWORK, TROUBLESHOOTING OF MOTORS, CIRCUIT BREAKERS, STARTERS, TRANSFORMERS, VSDS, UPS.

#
ELECTRICAL FITTER

DIPLOMA ENGINEERING IN ELECTRICAL

SHOULD BE SKILLED IN DISMANTLING, OVERHAULING & ASSEMBLING OF MOTORS & OTHER MACHINES

#
AUTO ELECTRICIAN

DIPLOMA IN MECHANICAL / AUTOMOBILE ENGG.

SHOULD BE SKILLED IN REPAIR OF HV GAS ENGINE / FLARE IGNITION, AUTO ELECTRICAL PROBLEMS, SERVICE OF BATTERIES.

#
SENIOR MECHANICAL TECHNICIAN

DIPLOMA IN MECHANICAL ENGINEERING

SHOULD BE SKILLED IN MAINTENANCE OF PUMPS, COMPRESSORS, VESSELS, ETC.

#
MECHANICAL TECHNICIAN

DIPLOMA IN MECHANICAL ENGINEERING

SHOULD HAVE EXPERIENCE IN MAINTENANCE, REPAIR, OVERHAUL OF MACHINERY; 3 YEARS PROVEN EXPERIENCE IN GRP PIPES

#
MECHANICAL FITTER

DIPLOMA IN MECHANICAL ENGINEERING

SHOULD BE ABLE TO ASSIST IN MAINTENANCE, REPAIRS, CLEANING OF MECHANICAL EQUIPMENTS.

#
DIESEL MECHANIC

DIPLOMA IN MECHANICAL / AUTOMOBILE ENGG.

SHOULD BE SKILLED IN MAINTENANCE, REPAIR AND OVERHUAL OF DIESEL AND PETROL MACHINERY.

#
SAND BLASTERS

I.T.I OR HIGH SCHOOL LEVEL

SHOULD HAVE EXPERIENCE IN SANDBLASTING WITH ABILITY TO OPERATE COMPRESSORS & BLASTING EQUIPMENT.SHOULD BE ABLE TO DO GARNET & METAL GRIT BLASTING IN EXTERIOR APPLICATIONS OF MATERIALS. MUST BE SKILLED IN USING A VARIETY OF SANDBLASTING EQUIPMENT.

#
INDUSTRIAL PAINTER (SPRAY PAINTERS)

I.T.I OR HIGH SCHOOL LEVEL

SHOULD HAVE INDUSTRIAL PAINTING EXPERIENCE. MUST KNOW HOW TO SELECT APPROPRIATE PAINT OR MIX PAINTS. SHOULD BE ABLE TO OPERATE BRUSH / SPRAY PAINTING TO APPLY PROTECTIVE COATINGS AND PAINTS TO THE FABRICATED STRUCTURAL STEEL MATERIAL OR PIPES / SPOOLS WITH THE ABILITY TO PREPARE FABRICATED STEEL ITEMS / SPOOLS FOR APPLICATION OF PAINT AND OTHER PROTECTIVE COATINGS. SHOULD BE ABLE TO OPERATE COMPRESSORS, BLASTING EQUIPMENTS, AIRLESS, CONVENTIONAL SPRAY GUNS AND BE ABLE TO MAKE SURFACE PREPARATION, BEFORE PAINTING.

#
INDUSTRIAL PAINTER (BRUSH PAINTERS)

I.T.I OR HIGH SCHOOL LEVEL

SHOULD HAVE EXPERIENCE IN BRUSH PAINTING ON EQUIPMENTS OR BUILDINGS.

#
HELPERS

HIGH SCHOOL LEVEL

SHOULD HAVE KNOWLEDGE IN TOOLS & TACKLES. SHALL HAVE GOOD COMMUNICATION SKILLS AND BE ABLE TO ADOPT SAFE WORK PLACE AND WORK WITH PAINTERS, BLASTERS & INSULATORS.

#
SUPERVISOR MECHANICAL - MAXIMO

B.SC IN MECHANICAL ENGINEERING

SHOULD HAVE EXPERIENCE IN A COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEM, IN THE USE OF SOFTWARE E.G. MS OFFICE, MS PROJECT ETC. THROUGH UNDERSTANDING OF PLANNING AND SCHEDULING TECHNIQUES. HAVE SUPERVISORY CAPABILITY TO DIRECT THE MAINTENANCE MANAGEMENT ACTIVITIES AND THE WORK OF SUBORDINATE STAFF. SHOULD BE ABLE TO USE MAXIMO OR EBEAMS APPLICATION FOR CREATING NECESSARY WORK ORDERS, MATERIAL RESERVATIONS AND PROGRESS TRACKING ETC.

#
ELECTRICIAN

DIPLOMA IN ELECTRICAL ENGINEERING

SHOULD HAVE EXPERIENCE IN OIL & GAS INDUSTRY AND PERFORM MAINTENANCE AND REPAIR OF ELECTRICAL EQUIPMENT. SHOULD BE ABLE TO PERFORM ALL THE PREVENTIVE MAINTENANCE WORK AND PERFORM MAINTENANCE & REPAIR OF ELECTRICAL HT AND LT NETWORK.

#
SCAFFOLDERS

HIGH SCHOOL EDUCATION

SHOULD HAVE EXPERIENCE IN ASSEMBLING AND DISMANTLING OF OVERHUNG, TOWER TYPE AND MOBILE SCAFFOLDINGS.

#
PLUMBER

SHOULD HAVE COMPLETED MINIMUM HIGH SCHOOL LEVEL EDUCATION

SHOULD HAVE EXPERIENCE IN INSTALLATION, REPAIRING & MAINTENANCE OF PLUMBING SYSTEMS & COMPONENTS. SHOULD HAVE KNOWLEDGE ABOUT TOOLS AND TACKLES, PIPE SIZES ETC. AND BE ABLE TO ASSEMBLE PIPE SECTIONS, TUBING & FITTINGS USING COUPLINGS, CLAMPS, SCREWS, BOLT & NUTS.

#
CARPENTER

SHOULD HAVE COMPLETED MINIMUM HIGH SCHOOL LEVEL EDUCATION

SHOULD HAVE EXPERIENCE IN MAKING FURNITURE, DOORS, WINDOW INSTALLATION AND REPAIR WORKS FOR THE SAME.

#
CIVIL FOREMAN

FULL TIME 3 YEARS DIPLOMA IN CIVIL ENGINEERING

SHOULD HAVE 8 YEARS OF EXPERIENCE IN CIVIL CONSTRUCTION AND MAINTENANCE WORKS IN OIL & GAS, PETROCHEMICAL AND REFINERY PROJECTS. PREVIOUS CLIENT APPROVAL MANDATORY FOR KNPC, KOC, KIPIC.

#
ROTATING EQUIPMENT MECHANIC

HIGH SCHOOL & ABOVE

  • Fulltime
  • 10+ YEARS OF RELEVANT EXPERIENCE. YEARS
  • 4 NOS
  • Apply job

SHOULD HAVE EXPERIENCE IN ERECTION AND ALIGNMENT OF ROTATING EQUIPMENT'S, SUCH AS PUMPS COMPRESSORS, TURBINES ETC, SHOULD HAVE KNOWLEDGE IN PUMP BASE FRAME ALIGNMENT BY USING MASTER LEVEL, SOFT FOOT CORRECTION, PRELIMINARY AND FINAL BY RIM & FACE ALIGNMENT, PRELIMINARY AND FINAL BY REVERSE ALIGNMENT, COUPLING GAP MEASUREMENT, PIPING PARALLELISM CHECKING AND PIPE STRESS CHECKING.